1997 Eldebo Replacement parts????

Home Forums The Mooring Post 1997 Eldebo Replacement parts????

  • This topic has 17 replies, 1 voice, and was last updated 3 weeks, 5 days ago by Justin hilburn.
Viewing 12 reply threads
  • Author
    • #505 Reply

      Hi ,
      Today i purchased my much sought after Eldebo to use a a dingy for our other boat. I’m one of those folks that loves to restore things to original as possible be it cars boats whatever.
      I’m looking for a few items
      The two front swivel seats…the ones I have, have new upholstery but the plastic structural parts are chalky for the sun and I would like to replace them.
      The White “rub rail” that runs around the side where the two halves were put together. Mine has a couple tears and is very yellowed
      The original stickers that run down the pontoons and up to the deck where they say Electric Deck Boat, I’m looking for both sides
      The front bimini top poles/supports. As well as burgundy canvas for the front and rear biminis.
      A burgundy mooring cover
      Does anyone know if there is any NOS equipment or any replacement parts at all for these neat lil boats?
      I sure would appreciate any and all help I can get.
      Thank you for your time, Brett 760-641-7666

    • #506 Reply

      Hi Brett, We have replacement parts available. Please email us at escboatsrefurb@gmail.com and we can get you what you are looking for. Thanks.

    • #1630 Reply
      Arthur Dressler

      I’m looking for the rudder sleve for a first generation eldebo

    • #1660 Reply
      Kristen Johnson

      need the stickers for the boat. anyone have?

      • #1726 Reply

        Hi Kristen, What stickers are you looking for? We no longer have the Eldebo decal as they are no longer made. Let us know and we can try to help you out. Thanks.

    • #1748 Reply
      Jim lieberman

      I am in need of a mooring cover and a Bimini 3 row top for my 2001
      2001 eldebo. Can you help?

    • #1964 Reply

      I litterally Just Bought a 1999 Leisure Life Lounger – I can not find any specifics about this boat – All I see is Eldebo & Esc’- Any help woudl be appreciated

      • #1965 Reply

        Hi Brian, The Leisure Life Lounger is no made and there are very few parts available. Please email us at escboats@gmail.com and we can see if we can find parts for you.

    • #2016 Reply
      Michael LaLonde

      I bought a 2002 Eldebo and the linkage that raises and lowers the motor is missing some parts. Do you have a diagram of the entire linkage so I can see what I need to restore it to full function.

    • #2045 Reply
      Larry Vance

      Am in search of the front boarding gate….it is the bar which opens and closes in the front of m ELDEBO pontoon boat. Got one?
      Thanks, Larry

    • #2262 Reply
      James Gillon

      I have a 2003 eldebo deck boat, with a Minn kota variable speed motor. I need all seals, and carbon brushes.

      • #2265 Reply

        James, Please send us an email at escboats@gmail and we can help you out.

    • #2292 Reply

      Hi my parents recently purchased a ’97 ElDeBo. I have been trying to gather as much information as possible as it does have issues. When we first got it the motor ran, but in reverse (ie reverse would go forward and forward would go reverse) and it was hooked up as a 12v motor. The minute me and my dad attempted to hook it up as a 24v motor, as the diagram under one of the battery cover seat cushions showed the motor became inop. We do not know the history of this boat, nor if the motor was original or not.

      I have also noticed that the diagram shown (in the owners manual on here) for raising and lowering the motor differs from what is in this boat. The one in this boat can only be tilted up out of the water, presumably to clean the prop off.

      We also have a bimini top but the fabric is in poor shape and most of the plastic connectors are broken.

    • #2314 Reply
      dennis phillips

      any chance you guys have replacement motors for a 1997 eldebo?

    • #2708 Reply
      Joseph Baird

      I recently pulled a 97 elder from the bottom of the lake where we have a house. Batteling some cancer, I needed a project so I converted it to a 20 hp Honda outboard. I built the helm station with hydraulic steering and remote controls. It has been a fun project but now I am encountering some other problems like, the boat is more heavy in the back even with it trimmed out, I was unable to find the table and pole.
      After 3 years of modifying and tinkering, I could use some aqua engineering help.
      Does anyone have a picture or a schematic of the under floor structure, like the floor supports etc.
      I am looking to repaint and sticker the boat

    • #2744 Reply
      Justin hilburn

      I need a replacement switch for the speed control on the mother of my so debo

Viewing 12 reply threads
Reply To: 1997 Eldebo Replacement parts????
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">